Code Compliance of Owens Corning Fiberglass Pipe Insulation ASJ Max SSLII

Posted by WISCO on 18th Dec 2018

Code Compliance of Owens Corning Fiberglass Pipe Insulation ASJ Max SSLII

When customers are submitting materials for a project they need to verify that the material they are planning on using meets the criteria required for the project.  Below is a short list of some of the most common standards and codes that Owens Corning ASJ Max Fiberglass Pipe Insulation meets or exceeds.  If the code or testing is not mentioned below please contact us and we can help assist you further.

Standards and Code Compliance Listing for Owens Corning Fiberglass Pipe Insulation:

  • ASTM C547, Mineral Fiber Pipe Insulation: Type I, Grade A; and Type IV, Grade B 
  • ASTM C585, Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing 
  • ASTM C1136, Flexible Low Permeance Vapor Retarders for Thermal Insulation: Types I, II, III, IV, X 
  • UL Labeled for Flame Spread Index of 25 or less and Smoke Developed Index of 50 and is fully building code compliant 
  • UL Listed and Labeled for use over PVC and other polymer pipes UL Category BSMP 
  • ASTM C795, Thermal Insulation for Use in Contact with Austenitic Stainless Steel4 
  • Nuclear Regulatory Commission Guide 1.36, Non-Metallic Thermal Insulation4 
  • NFPA 90A and 90B

Owens Corning Fiberglass Pipe Insulation ASJ Max SLLII